Inconel 600(UNS N06600 W.Nr.2.4816)

1.Inconel 600 INTRODUCTION

A nickel-chromium alloy with good oxidation  resistance at high temperatures and  resistance to chloride-ion stress-corrosion  cracking, corrosion by high-purity water  and caustic corrosion. Used for furnace  components, chemical and food processing,  nuclear engineering and sparking electrodes.  

2.Inconel 600 STANDARD  PRODUCT FORMS

Pipe, tube, sheet, strip, plate, round bar, flat bar, forging  stock, hexagon, wire and extruded section.

3.Inconel 600 MAJOR  SPECIFICATIONS

UNS N06600 BS 3072 – 3076 (NA14) 

ASTM B 163, B 166 – B 168,   B 366, B 516, B 517, B 564,   B 751, B 775, B 829 

ASME SB-163, SB-166 – SB-168,  SB-366, SB-516, SB-517,  SB-564, SB-751, SB-775,   SB-829 

ASME Code Cases 1827, N-20, N-253, N-576 

SAE AMS 5540, 5580,  5665, 5687 

DIN 17742, 17750 – 17754 

Werkstoff Nr. 2.4816

VdTüV 305 

NACE MR-01-75 

QQ-W 390 

EN 10095 

ISO 6207, 6208, 9723 –9725,   4955A

4.Inconel 600 LIMITING CHEMICAL  COMPOSITION, %

Ni.........72.0 min. 

Cr ..... 14.0 – 17.0  

Fe....... 6.0 – 10.0  

Plus Co. 

C..........0.15 max. 

Mn......... 1.0 max. 

S....... 0.015 max. 

Si........... 0.5 max. 

Cu.......... 0.5 max.

5.Inconel 600 PHYSICAL CONSTANTS  AND THERMAL  PROPERTIES

Density, Ib/in3 ........................................................................0.306 

g/cm3 ......................................................................... 8.47 

Melting Range, °F ...................................................2470 – 2575 

°C ...................................................1354 – 1413  

Specific Heat, Btu/lb•°F ....................................................0.106 

J/kg•°C........................................................... 444 

Curie Temperature, °F ......................................................... -192 

°C ......................................................... -124 

Permeability at 200 Oersted (15.9 kA/m)....................1.010 

Coefficient of Expansion, 70 – 200°F, 10-6 in/in •°F........ 7.4 

21 – 93°C, μm/m •°C............ 13.3 

Thermal Conductivity, Btu • in/ft2•h•°F........................... 103 

W/m •°C.......................................... 14.9 

Electrical Resistivity, ohm • circ mil/ft............................... 620 

μΩ•m................................................ 1.03

6.Inconel 600 TYPICAL MECHANICAL  PROPERTIES

(Annealed) 

Tensile Strength, ksi..................................................................95 

MPa............................................................ 655 

Yield Strength (0.2% Offset), ksi...........................................45

MPa..................................... 310 

Elongation, % ..............................................................................40